Description

The Ferrari F12 Berlinetta is one of the most celebrated front engined sports cars in Ferrari history. When it was introduced it was the most powerful road car Ferrari had ever built and it remains one of the most visceral and rewarding driving experiences available to anyone who has the privilege of owning one. The naturally aspirated V12 engine produces 730 horsepower and it delivers every one of those horses with a directness and a character that defines what a Ferrari should be. The F12 is not just a fast car. It is a pure expression of what Ferrari stands for and owners of this machine understand exactly what they have.

That V12 engine generates serious heat and it demands a cooling system that can handle the thermal load without compromise. Unfortunately the factory radiator is not that system. It carries a design flaw that will cause it to fail over time and when it does the consequences for your engine can be severe. Our all aluminum Ferrari F12 radiator upgrade is the permanent and definitive solution to this problem. We built this radiator to honor the engineering excellence of the F12 Berlinetta and to give owners the confidence that their cooling system will never be a weak point in an otherwise extraordinary machine.

The OEM radiator in the Ferrari F12 Berlinetta uses plastic end tanks that are bonded and crimped onto an aluminum core. This is a standard mass production compromise that works adequately in the short term but creates a serious and predictable long term reliability problem. The naturally aspirated V12 in the F12 is designed to rev hard and it generates intense and sustained heat in the process. Every drive puts the cooling system through extreme thermal cycles and over time those cycles cause the plastic end tanks to become brittle and the adhesive bond between the plastic and the aluminum to weaken and eventually fail.

When the bond fails coolant leaks out and the engine begins to overheat. This is not a rare or unusual outcome. It is a failure that is built into the design of the factory part from the very beginning. The hose necks on the OEM unit are also bonded on which creates additional weak points in an already compromised design. A coolant leak in a vehicle as powerful and as complex as the F12 Berlinetta can cause significant engine damage and the repair costs can be enormous. Our Ferrari F12 radiator upgrade addresses every one of these failure points by eliminating plastic from the construction entirely and replacing it with a fully welded aluminum structure that will never fail the same way the factory unit does.

Our Ferrari F12 radiator upgrade is built entirely from high quality aluminum. There is no plastic anywhere in the design. Every end tank every fitting and every joint is TIG welded by master craftsmen using tools and equipment that are dedicated exclusively to aluminum fabrication. This prevents cross contamination from steel or other metals and ensures that every weld is clean strong and completely free of porosity. The result is a monolithic aluminum structure that is impervious to the heat cycles and vibrations that destroy the OEM unit over time.

The all aluminum construction also delivers a meaningful weight advantage. Our radiator weighs approximately 10 ounces less than the factory plastic and aluminum unit which comes in at 14 pounds and 14 ounces. That weight saving is achieved by eliminating the heavy adhesive seams and the inefficient bonded plastic structure. The inlet and outlet fittings are also a significant improvement over the factory design. Instead of bonded on hose necks our radiator uses beveled and welded fittings that match the pipe flow geometry precisely. This provides a smoother and more refined coolant flow transition and eliminates another potential leak point from the system. Your V12 stays at its optimal operating temperature under all conditions and the cooling system supports the engine the way it was always meant to.

Every Ferrari F12 radiator upgrade we produce is made in the USA at our Los Angeles facility. We use tools and equipment that are dedicated exclusively to aluminum work. This is a fundamental part of how we operate. Cross contamination from steel or other metals can compromise the structural integrity of an aluminum weld and we will not allow that risk in our manufacturing process. Our welders are master level craftsmen who produce welds that are as visually impressive as they are structurally sound. This level of quality is a direct response to the failures we have seen in lower cost aftermarket alternatives.

Competing aftermarket radiators frequently suffer from porous welds and incorrect thread pitch and improper shroud bolt sizing. Some require modification just to fit the vehicle which is completely unacceptable for a precision machine like the Ferrari F12 Berlinetta. Our radiator is engineered to fit correctly from the start with no compromises and no shortcuts.

We offer two finish options to suit your preferences. The first is a Bare aluminum finish which gives the radiator a classic raw metal appearance that develops a natural patina over time. The second is a premium black painted finish that resists discoloration and maintains a clean and consistent appearance through the grille and inside the engine bay. Both options are built to last and both reflect the craftsmanship behind every unit we produce. When you invest in our Ferrari F12 radiator upgrade you are getting a product that performs at the highest level and looks exceptional in the engine bay of one of Ferrari’s most celebrated sports cars.

We designed our Ferrari F12 radiator upgrade to install without any modification to the vehicle. All fittings and mounting points are positioned to match the factory layout exactly. The radiator retains the factory fan shroud so there is no need for an expensive and complicated aftermarket fan conversion. This is a critical advantage over competing products that require incorrect M6 threads where the factory specifies M5 forcing owners to drill new holes and modify hardware just to complete the installation.

Our radiator uses the correct M5 factory thread pitch throughout. It drops in cleanly with no drilling and no modifications and no interference with AC lines or any other components. We include all the necessary mounting hardware with every unit including new rubber bushings for the radiator mounts and the engine oil cooler mounting. Once this radiator is installed it will not need to come out again for decades. We back every unit with an industry leading 5 year warranty because we are fully confident in what we build and we want every F12 Berlinetta owner to feel that same confidence.

The F12 Berlinetta is a vehicle that rewards long term ownership and serious collectors recognize its significance in the Ferrari lineage. As a visible and permanent upgrade in the engine bay our radiator also adds long term value to the vehicle. Future owners will recognize the quality of the upgrade and the fact that a known failure point has been permanently resolved. From the correct M5 thread pitch to the complete hardware kit every detail of this radiator has been engineered to provide a seamless and permanent solution to the OEM radiator and its inherent flaws. This is the last radiator your Ferrari F12 Berlinetta will ever need.

• Permanent OEM Flaw Solution Eliminates the factory plastic end tanks and bonded seams which are guaranteed to fail and provides a permanent replacement that will outlast the vehicle.
• 100 Percent All Aluminum Construction The entire radiator including the end tanks and fittings is constructed from high quality aluminum and TIG welded by master craftsmen for a monolithic and leak proof structure.
• Lighter Than OEM Weighs approximately 10 ounces less than the 14 pound and 14 ounce factory unit reducing weight without compromising strength or durability.
• Superior Flow Design Features beveled and welded inlet and outlet fittings that provide a smoother and more refined coolant flow transition compared to the failure prone bonded on OEM hose necks.
• True Bolt In Replacement Engineered to be a direct drop in replacement that retains the factory fan shroud and uses the correct M5 factory thread pitch requiring no drilling or modification.
• Premium Finish Options Available in a Bare aluminum finish for a classic raw metal look or a premium black painted finish to prevent discoloration and maintain a clean appearance.
• Made in the USA Proudly manufactured in Los Angeles using tools and equipment exclusively dedicated to aluminum fabrication to prevent cross contamination and ensure the highest quality welds.
• 5 Year Warranty Backed by an industry leading 5 year warranty giving you complete confidence and peace of mind in your investment.
• Complete Hardware Kit Includes all necessary new rubber bushings for the radiator and engine oil cooler mounts so the radiator does not need to be removed again for decades.
• Enhanced Collector Value As a visible and high quality and permanent upgrade it removes a known failure point adding confidence and long term value for future owners and collectors.