Description

The Ferrari GTC4Lusso T is one of the most capable and practical grand tourers Ferrari has ever built. Its twin turbocharged V8 engine delivers extraordinary performance across a wide range of driving conditions whether you are navigating city traffic or stretching its legs on an open highway. The all wheel steering and four seat configuration make it genuinely usable every day while the Ferrari badge and V8 soundtrack remind you that this is no ordinary car. Owners of the GTC4Lusso T understand that they have something truly special and they expect every component of the vehicle to perform at the same level as the engine itself.

Unfortunately the factory radiator does not meet that expectation. It is built to a mass production standard that prioritizes cost over longevity and it carries a design flaw that will cause it to fail over time. Our all aluminum Ferrari GTC4Lusso T radiator upgrade is the permanent and definitive solution to this problem. We engineered this radiator to outlast the vehicle and to give GTC4Lusso T owners the confidence that their cooling system will never be the reason they are stranded on the side of the road.

The OEM radiator in the Ferrari GTC4Lusso T uses plastic end tanks that are bonded and crimped onto an aluminum core. This is a standard mass production approach that works adequately in the short term but creates a serious long term reliability problem. The twin turbocharged V8 in the GTC4Lusso T generates intense and sustained heat especially under load. Every drive puts the cooling system through extreme thermal cycles and over time those cycles cause the plastic end tanks to become brittle and the adhesive bond between the plastic and the aluminum to weaken and eventually fail.

When the bond fails coolant leaks out and the engine begins to overheat. This is not a rare edge case. It is a predictable failure that is built into the design of the factory part from the beginning. The hose necks on the OEM unit are also bonded on which creates additional weak points in the system. A coolant leak in a vehicle as complex and expensive as the GTC4Lusso T can lead to significant engine damage and repair bills that far exceed the cost of a proper upgrade. Our Ferrari GTC4Lusso T radiator upgrade addresses every one of these failure points by eliminating plastic from the construction entirely.

Our Ferrari GTC4Lusso T radiator upgrade is built entirely from high quality aluminum. There is no plastic anywhere in the design. Every end tank every fitting and every joint is TIG welded by master craftsmen using tools and equipment that are dedicated exclusively to aluminum fabrication. This approach prevents cross contamination from steel or other metals and ensures that every weld is clean strong and completely free of porosity. The result is a monolithic aluminum structure that is built to withstand the thermal demands of a turbocharged V8 for the entire life of the vehicle.

The all aluminum construction also delivers a real world weight advantage. Our radiator weighs approximately 10 ounces less than the factory plastic and aluminum unit which comes in at 14 pounds and 14 ounces. That weight saving comes from eliminating the heavy adhesive seams and the inefficient bonded plastic structure. The inlet and outlet fittings are also a significant improvement over the factory design. Instead of bonded on hose necks our radiator uses beveled and welded fittings that match the pipe flow geometry precisely. This provides a smoother and more refined coolant flow transition and eliminates another potential leak point from the system. Your turbocharged V8 stays at its optimal operating temperature under all conditions and the cooling system supports the engine the way it was always meant to.

Every Ferrari GTC4Lusso T radiator upgrade we produce is made in the USA at our Los Angeles facility. We use tools and equipment that are dedicated exclusively to aluminum work. This is not a minor operational detail. Cross contamination from other metals can compromise the structural integrity of an aluminum weld and we refuse to allow that risk in our manufacturing process. Our welders are master level craftsmen who produce welds that are as visually impressive as they are structurally sound. This level of quality is a direct response to the failures we have seen in lower cost aftermarket alternatives.

Competing aftermarket radiators frequently suffer from porous welds and incorrect thread pitch and improper shroud bolt sizing. Some require modification just to fit the vehicle which is completely unacceptable for a precision machine like the Ferrari GTC4Lusso T. Our radiator is engineered to fit correctly from the start with no compromises and no shortcuts.

We offer two finish options to suit your preferences. The first is a Bare aluminum finish which gives the radiator a classic raw metal appearance that develops a natural patina over time. The second is a premium black painted finish that resists discoloration and maintains a clean and consistent appearance through the grille and inside the engine bay. Both options are built to last and both reflect the quality of the craftsmanship behind them. When you invest in our Ferrari GTC4Lusso T radiator upgrade you are getting a product that performs at the highest level and looks the part in the engine bay.

We designed our Ferrari GTC4Lusso T radiator upgrade to install without any modification to the vehicle. All fittings and mounting points are positioned to match the factory layout exactly. The radiator retains the factory fan shroud so there is no need for an aftermarket fan conversion. This is a critical advantage over competing products that require incorrect M6 threads where the factory specifies M5 forcing owners to drill new holes and modify hardware just to complete the installation.

Our radiator uses the correct M5 factory thread pitch throughout. It drops in cleanly with no drilling and no modifications and no interference with AC lines or any other components. We include all the necessary mounting hardware with every unit including new rubber bushings for the radiator mounts and the engine oil cooler mounting. Once this radiator is installed it will not need to come out again for decades. We back every unit with an industry leading 5 year warranty because we are confident in what we build and we want every GTC4Lusso T owner to share that confidence.

The GTC4Lusso T is a vehicle that rewards long term ownership. As a visible and permanent upgrade in the engine bay our radiator also adds long term value to the vehicle. Future owners and collectors will recognize the quality of the upgrade and the fact that a known failure point has been permanently resolved. From the correct M5 thread pitch to the complete hardware kit every detail of this radiator has been engineered to provide a seamless and permanent solution to the OEM radiator and its inherent flaws. This is the last radiator your Ferrari GTC4Lusso T will ever need.

•Permanent OEM Flaw Solution Eliminates the factory plastic end tanks and bonded seams which are guaranteed to fail and provides a permanent replacement that will outlast the vehicle.
•100 Percent All Aluminum Construction The entire radiator including the end tanks and fittings is constructed from high quality aluminum and TIG welded by master craftsmen for a monolithic and leak proof structure.
•Lighter Than OEM Weighs approximately 10 ounces less than the 14 pound and 14 ounce factory unit reducing weight without compromising strength or durability.
•Superior Flow Design Features beveled and welded inlet and outlet fittings that provide a smoother and more refined coolant flow transition compared to the failure prone bonded on OEM hose necks.
•True Bolt In Replacement Engineered to be a direct drop in replacement that retains the factory fan shroud and uses the correct M5 factory thread pitch requiring no drilling or modification.
•Premium Finish Options Available in a Bare aluminum finish for a classic raw metal look or a premium black painted finish to prevent discoloration and maintain a clean appearance.
•Made in the USA Proudly manufactured in Los Angeles using tools and equipment exclusively dedicated to aluminum fabrication to prevent cross contamination and ensure the highest quality welds.
•5 Year Warranty Backed by an industry leading 5 year warranty giving you complete confidence and peace of mind in your investment.
•Complete Hardware Kit Includes all necessary new rubber bushings for the radiator and engine oil cooler mounts so the radiator does not need to be removed again for decades.
•Enhanced Collector Value As a visible and high quality and permanent upgrade it removes a known failure point adding confidence and long term value for future owners and collectors.